The Earth is green
Summary: the advantages of LED lighting
LED lighting works much better than traditional lighting solutions, such as halogen flood lights or metal halide lamps, for a number of reasons, including:
- Lower energy consumption (LED’s offer the lowest possible running costs: less than 100 watts for the highest power units; whereas with other forms of lighting much more energy is wasted generating heat)
- Superior quality illumination (even spread of light, no dark or bright spots, better targeting especially with higher-end LED lighting products)
- Longer product life and reliability (up to 100,000 hours – in comparison fluorescent bulbs typically last 10,000 hours and incandescent bulbs 1,000; the best LED products available today deliver 10 years life, with warranty)
- No maintenance (no bulb failure, no down-time)
- Instant start (no warm up time for full light output)
- Suitable for challenging environments (higher-end products are weather-hardened, hot and cold climate tolerant, vandal resistant)
- Flexibility of installation and maintenance (with new and specialist developments such as poe, and explosion protected lighting)
With its higher performance and lower power consumption LED lighting provides an ideal solution for any CCTV application.
Energy saving benefits
Leds are unquestionably the most energy-efficient choice for lighting and by converting to LED lights, users can make significant savings on energy bills. It’s estimated by the Carbon Trust that 40% of energy used by organisations goes on lighting, so the potential to reduce bills is substantial. Not only to leds save energy and have lower running costs, because they are not prone to bulb failure they do not carry the ‘hidden’ energy costs associated with time consuming maintenance work.
When you take into account higher running costs and money spent on replacing bulbs that don’t last very long an organisation using 100 CCTV or security lights could be wasting £45,000 per year. This is based upon 4,400 hours usage per year at 10p kw/hr; with labour costs conservatively calculated at £40 per bulb change; it’ll be much higher if a cherry-picker is needed.
(NB. If you want to get an accurate figure for a particular site, in fact it’s very easy to work out exactly how much can be saved by using the energy saving calculator which Raytec provides online).
Superior LED performance
With ongoing product development and improvements based on frequent night-test sessions, LED illuminators have been refined to provide the even quality illumination that is exactly what CCTV cameras need.
With the right products the light can be easily targeted and adjusted to give both the correct range (typically up to 370m+) and angle of coverage (typically anything from 10-180°) for each application.
LED lights are also highly flexible in use, they start up immediately (with no warm up period) and so can be used for active warning systems, and for intelligent detector-driven CCTV applications.
The advantages of IR (infra-red)
Designed for use with both black & white and day/night cameras, infra-red illuminators provide IR light which is invisible to the human eye but visible to the CCTV camera.
Because IR is invisible to the human eye it is ideal for covert surveillance; the camera can see, but the intruder cannot.
Further, as their light cannot be seen, IR illuminators are the perfect solution in sensitive areas where light pollution needs to be avoided; areas such as residential neighbourhoods and parks.
IR illumination also works well over long distances, with illumination at ranges up to 370m. Therefore in many applications IR illumination is the perfect lighting tool for CCTV, allowing cameras to capture crisp, clear images in black & white, and optimising camera performance.
When to choose WL (white-light)
Where accurate colour images are required, white-light illuminators are the ideal solution, providing high quality visible crystal clear illumination to optimise colour camera performance.
White Light LED technology allows accurate colour image capture at night and ensures that the CCTV system works at its best 24/7.
White Light LED products can be used as a powerful deterrent. For example, with its quick start characteristic this technology can be used as part of an intelligent, detector-driven security system. Purpose-designed for CCTV, the technology’s even illumination allows the best colour image capture, without the bright or dark spots which can be a problem with other types of lighting.
This is also a multi-purpose lighting solution that can be used for non security applications, such as commercial and general lighting.
Alternative lighting technology
Following is a summary of different types of lighting technology that has been commonly used.
1) Incandescent Lamps (Including Halogen)
For CCTV purposes, bulb life is limited and they are very inefficient. They are generally expensive to run (typically500 watts) and expensive to maintain (up to 3 bulb changes per year). End users are increasingly moving away from using halogen based lighting products in favour of longer life leds.
Incandescent bulbs were the first bulbs developed and are highly inefficient, wasting 90% of input energy as heat. Their heat output is such that they are extremely hot to touch and can heat surrounding objects in close proximity.
Halogen bulbs provide a minimal increase in efficiency and still waste as much as 85% of input energy as heat. Halogen bulbs are smaller and higher pressure than incandescent bulbs causing halogen bulbs to have an extremely hot surface hazardous to the touch. Bringing the bulb into contact with cold surfaces such as residue from fingerprints, particularly sodium, may cause bulb failure.
2) Fluorescent Lamps
Their effectiveness for CCTV purposes is limited due to the perceived “beating” effect when used with a CCTV camera. They are generally low power and designed mainly for internal fittings. As they have a large diffused source the light output is difficult to focus and control. Fluorescent bulbs are much more efficient than incandescent bulbs, operating at approximately 40% efficiency. Only 60% of the input energy is wasted as heat so fluorescent lamps run much cooler than incandescent lamps and can provide equivalent power from much lower electrical input. For this reason, and the fact that fluorescent lamps tend to last 10 – 20 times as long as an incandescent bulb, they are commonly used in domestic homes as long life bulbs. However, fluorescent lamps produce a flicker imperceptible to the human eye but visible to cameras as a “beat” effect making fluorescent illumination unsuitable for video surveillance. Fluorescent lamps also contain the hazardous material mercury.
3) HID Lamps
HID lamps could be used in CCTV. They are efficient, provide good colour rendition and they provide a relatively long life – up to 12,000 hours. However, they suffer from a slow start (2-3mins) and cannot be turned on immediately after being turned off. High intensity discharge lamps are 60-80% efficient and compared to incandescent and fluorescent lamps provide much more light from a smaller package. HID forms include low pressure sodium (unsuitable for CCTV due to its yellow tinge), high pressure sodium (which is more acceptable but produces worse colour rendition than Metal Halide) and Metal Halide. Metal Halide HID bulbs provide a very natural, cool clear White-Light with excellent colour rendition. HID lamps are commonly used for street lighting and in car headlights.
LED’s – technical background
Light Emitting Diodes (LED’s) are semiconductors that naturally emit a narrow band of light. They are a relatively new development in lighting but their usage is expanding rapidly on the back of clear technical advantages. LED’s are comparatively expensive to purchase but provide extremely long life up to 100,000 hours. In comparison fluorescent bulbs typically last 10,000 hours and incandescent bulbs 1,000. LED efficiency is typically 80-90% with the greatest efficiency coming from LED’s producing red light. Advantages of LED’s include extremely low electrical consumption, low operating temperatures and continuity of colour through the operating life of the LED. Unlike traditional bulbs LED’s are also highly durable, insensitive to vibration and they are more robust and difficult to break. They are also capable of emitting light at a given wavelength without the need for a filter and are quick start devices. Power management and thermal management are important to ensure LED’s deliver expected performance.
Recent LED developments
Through-hole leds are expensive to mount to pcbs and generally are not as robust as Surface Mount Technology (SMT). SMT LED’s offer better thermal management and allow the LED’s to be driven harder without compromising performance.
CCTV lighting – which wavelength?
- 715-730nm – overt IR, produces a red glow like a red traffic light.
- 815-850nm – semi-covert IR with a faintly red glow only just visible.
- 940-950nm – covert IR invisible to the human eye.
Infra-Red light can be used to provide discrete or covert illumination for CCTV; to minimise light pollution; or to provide very long distance illumination. IR can be used with monochrome and day/night cameras. NB. As IR becomes more covert it becomes more difficult for the camera to see and consequently distances are reduced. 940-950nm IR should only be used with highly sensitive cameras fitted with high performance lenses. Focussing is also more difficult at those wavelengths as lenses start to operate more inefficiently with 940-950nm.
2) White Light:
A mixture of light from 400-700nm provides true White-Light.
When to use: to illuminate an area for the CCTV system; improve the overall level of illumination for key personnel; provide a welcoming environment for authorised personnel; and to deter crime by illuminating a secure area on intrusion; White Light can be used with monochrome, colour and day/night cameras
When providing CCTV illumination the beam angle should always cover the full field of view. The correct angle of illumination must be used to light the full scene. Modern units allow the angle of illumination to be adjusted on site to suit the specific scene requirements.
Traditional Beam Patterns: as standard, beam patterns from an illuminator are provided at a fixed angle, either narrow or wide. Historically, spot and flood lenses have dominated but more recently these have been rejected in favour of more precise angles such as 10, 30 or 60 degrees. However, these are still fixed angle output, meaning they are inflexible on site. If the lighting requirements change or if the cameras field of view is changed the lighting may be unacceptable. Also, it means that all lighting decisions must be made prior to installation which is often difficult. Often final lens decisions and viewing areas are made during the installation process. Typical Beam Patterns: Spot; 10°; 20°; 30°; 60°; flood.
The Inverse Square Law
The inverse square law describes how the intensity of a light is inversely proportional to the square of the distance from the light source(the illuminator). Light obeys the inverse square law so to fully understand the way that light travels, and the resultant impact on CCTV systems, some understanding of the inverse square law is required. As light travels away from the point source it spreads both horizontally and vertically and therefore intensity decreases. In practise this means that if an object is moved from a given point, to a point double the distance from the light source it will receive only a ¼ of the light (2 times the distance squared = 4). Taking this theory further, if an object at 10m from a light source receives 100 LUX, moving the object to 40m, it will receive only 1/16th of the light (4 times the distance, squared = 16) resulting in the object receiving only 6.25 LUX. The inverse-square law applies to both White-Light and Infra-Red light in the same way. The effects of the inverse-square law make clear how a CCTV camera has to handle a wide range of light levels within a given field of view and shows the importance of even illumination.
Using multiple illuminators
The inverse-square law explains how light intensity reduces over distance but can also be used to calculate how many additional illuminators are needed to achieve specific increases in distance.
Calculating how many illuminators are needed to cover a given distance:
If the distance from a single illuminator is doubled then the intensity of the light is quartered. Therefore to achieve double the distance of one illuminator, achieving the same power on scene, 4 illuminators are required (2 squared = 4). Similarly to achieve 3 times the distance of one illuminator, 9 illuminators are required (3 squared =9).
Calculating the impact of multiple illuminators on distance: the inverse square law can also be used to calculate the effect of using multiple illuminators by taking the square root of the change in illumination intensity at source. For example, using 4 illuminators will produce a 2 fold increase in distance (the square root of 4 is 2), and using 25 illuminators will result in a 5 fold increase in distance (the square root of 25 is 5).
NB. There is no need to use multiple illuminators to achieve increases in distance. Tighter angle devices, or more powerful illuminators can provide the required additional power output.
How to Specify Lighting
1) Infra-Red or White-Light?
Identifying the purpose of the system will point to the type of light to use.
Infra-Red light provides greater distance, a varying degree of invisibility (depending on the exact wavelength) and no light pollution. Infra-Red is light designed only to be used by CCTV cameras. White-Light provides the opportunity to illuminate an area for pedestrians, staff or vehicles in addition to the CCTV system. It can also be used as a visual deterrent when turned on if an intruder is detected by a PIR.
The illumination should ideally match the angle the camera / lens is set-to in order to provide best performance. If not, and too narrow an illumination angle is chosen, the camera will simply see a bright spot in the middle of the scene and the contrast between light and dark areas on scene will be too great to provide high quality images. Illumination which is too wide wastes energy and reduces achievable distance.
Note: The adoption of vari-focal lenses has caused difficulty in specifying lighting. With vari-focal lenses the exact FOV is often only established on site through trial and error making exact matching to fixed angle lighting impossible in advance. The latest vari-focal lighting allows the output angle of an illuminator to be adjusted on-site to match the set-up of a vari-focal lens.
After selecting the angle, the next consideration is distance. How far should the lighting illuminate? Installers and specifiers should be aware that as angle increases, distance decreases.
4) Camera and Lens Considerations
The exact performance of any illuminator in a CCTV system is dependant upon the camera and lens combination used. For best results a high sensitivity camera (for IR projects an IR sensitive camera) should be used with a high transmission lens. Generally a CCTV imaging system (camera, lens, illumination) is only as good as its weakest link.
Practical Installation Considerations
Lighting and Domes
Providing lighting for domes has long been a challenge for CCTV professionals as the lighting cannot be fitted to move with the camera as would be the case with a traditional PTZ system. However, there are three lighting solutions available for fully functional domes:
- Wide angle illumination: New wide angle illuminators covering 120-180° allow the full 360° angle of a dome to be covered with only 2 illuminators.
- Target Area Illumination: Illuminators can be used to target specific points of interest including gates and entry points on pre-set positions.
- Local Area Illumination: Illumination can be fitted away from the camera to flood the scene. When the camera zooms in the whole area will be lit.
Lighting and PTZ systems
Typically PTZ systems are used in applications where a single camera is designated to secure a large area. At long distances the camera lens is often zoomed in giving a narrow field of view and at short distances the camera lens pans to a wide angle. The flexibility of such a system requires the lighting to cover long distances and narrow and wide angles. The solution is to use a twin lighting system. The old fashioned method was to use 1 narrow and 1 wide angle illuminator. The better solution is to provide even illumination. Both illuminators should be attached to the PT motor by a bracket. A second solution for shorter range PTZ units is to use a single wider angle illuminator such as a 30° – 60° model. If the required distance is not too great a wide angle illuminator may be able to cover the maximum distance as well as the wide angle.
Infra-Red and Focus Shift
Focus shift is a potential issue encountered when setting up camera systems for 24-hour performance using Infra-Red. The different wavelengths of visible light (400-700nm) and Infra-Red (700-1,000nm) create different focus points through the lens onto the camera chip. This can lead to a loss of image focus at night, particularly if the camera is set up during daytime operation. The degree of focus shift depends on a variety of factors:
- Lens quality
- Wavelength of the IR. (Longer wavelengths such as 950nm will provide a more exaggerated focus shift).
- IR response of the camera
Focusing the camera correctly for low light performance means the camera will be focussed for IR with the aperture fully open. During daytime operation the increased depth of field created by a closing aperture will counter the effects of focus shift. The best solution is to focus the camera using only Infra-Red. This can be achieved by: setting up the camera at night using Infra-Red lighting; using an IR pass filter over the camera lens to simulate.
Back Focus describes the relationship between the distance of the lens to the camera chip. This distance is critical to maintaining the proper depth of field through changing focal lengths and varying light conditions and setting it correctly can ensure the image stays in focus 24 hours a day. Correct back focus of the camera can be used to overcome the typical issue of a sharp daytime image followed by a blurred image at night. This situation is caused when, during bright sunlight, the lens is closed and the depth of field is very wide, whereas when the light level drops the iris opens and the depth of field decreases causing a lack of focus. For correct 24-hour focusing a camera should be back focused with the lens iris fully opened to simulate the worst possible depth of field. Neutral Density filters can be used to cover the lens during back focusing to simulate lower light intensity on scene. This is an effective solution for colour cameras or cameras using White-Light CCTV illumination. However, for mono cameras, or day-night cameras using Infra-Red lighting, the best solution is to place an Infra-Red Pass filter over the lens.
High Sensitivity Cameras and Lighting
All cameras require light, sensitivity is simply a measure of how much light they need. High sensitivity cameras require less lighting to produce high quality CCTV images. However, even high sensitivity cameras should be fitted with professional CCTV lighting to provide even illumination. This allows the camera to provide sharp, clear images.
Megapixel cameras and lighting
Digital cameras record brightness on a per-pixel basis so the greater the amount of pixels the smaller surface area each pixel has available to capture light. The end result is that the greater the resolution the less sensitive the camera. A megapixel constitutes 1,000,000 individual pixels and Megapixel cameras offer a number of advantages to installers including higher resolution, wider angle images, and the ability to digitally zoom images. However, they are by nature less sensitive than standard CCD cameras meaning they require additional lighting to achieve high quality images at night. With Megapixel cameras ALWAYS use additional CCTV lighting to achieve high quality night-time images. Megapixel cameras only deliver their advantages when viewing a correctly illuminated scene.
At M-Lite use the newest technology, DMX and PMW control way. There are four individually adjustable channels including; Automatic, Veg, Flower,and UVB channels. The unit provides a dimmer and timer, with 2.4 GHz wireless intelligent control with multiple join technology. Steady and smart voltage auto-switching regulating power supply, adjusts to the appropriate voltage for international use.
Actual power draw 350 watts
1.7 amps @ 220V;3.4amps @ 110V
Power Factor(PF): > 0.96 Frequency: 50/60Hz
AC Cable Length: 4ft
Universal Input Range:100 to 240VAC / 50 to 60Hz
UL, CE, & ROHS
M-Lites LED Grow Lights emit the exact spectrum of light needed for photosynthesis and all phases of plant growth
LED Lighting Terminology
Color Temperature and Color Rendering (Kelvin and CRI): There are two standard measurements for the color characteristics of light: “color rendering index” (CRI), a term used to describe the extent to which an artificial light source is able to render the true color of objects as seen by natural outdoor sunlight which has a CRI of 100, and “color temperature”, which expresses the color appearance of the light itself.
Color Rendering Index (CRI): Incandescent is used as the base reference of 100 CRI. Compact fluorescent lamps are graded at 82-86 CRI, which is considered high quality color rendering. CRI is a more important consideration for retail lighting design than it is for office lighting. Any CRI rating of 80 or above is considered high and indicates that the source has good color properties. Incandescent lamps and daylight have a CRI of 100, the highest possible CRI. The higher the CRI of the light source, the “truer” it renders color. At M-Lite we strive to manufacture our LED lighting at 80 CRI or better.
Color Temperature (Kelvin): Refers to the way color groups are perceived – the psychological impact of lighting. Color temperature is how cool or warm the light source appears. The color temperature of a light source is a numerical measurement of its color appearance. This temperature is based on the principle that any object will emit light if it is heated to a high enough temperature and that the color of that light will shift in a predictable manner as the temperature is increased. This system is based on the color changes of a black metal as it is heated from a cold black to a white hot state. As the temperature increases, the color would shift gradually from red to orange to yellow to white and finally to a blue white. Color temperature is measured in degrees Kelvin (K). Colors and light sources from the red/orange/yellow side of the spectrum are described as warm (incandescents) and those toward the blue end are referred to as cool (natural daylight). The sun, for example, rises at approximately 1800 Kelvin and changes from red to orange to yellow and to white as it rises to over 5000 Kelvin at high noon. It then goes back down the scale as it sets.
Luminous Flux – the flow of light measured in lumens. With light bulbs, it provides an estimate of the apparent amount of light the bulb will produce. Depending on the application, much of an incandescent’s light is wasted because it’s emitted in every direction. LEDs on the other hand, put out directional light, sending all of the light exactly where it’s needed. This is why an LED producing 500 lumens might be equivalent to an incandescent producing 900 lumens.
Lumens measure how much light you are getting from a bulb. The more lumens means it’s a brighter light; fewer lumens means it’s a dimmer light.
Lumens produced is just one factor of the performance of a light, and sometimes it is misleading. To understand how to fully evaluate the LED product, we need to look the overall system efficiency, optical control, thermal management of the LEDs.
Another factor that can also be very misleading is the life of an LED lights, the life time is defined by how long will the light last before the fixture reaches 20 percent lumen depreciation.
For example, most of the time an LED Light has a life time of 50,000 hours, it does not mean that after 50,000 hours, the LED lighting product will not work at all. It will still be working, but the Lumens it emitts is factored at 20% less than when it was first used.
For more LED Lighting Facts, visit our website at http://www.m-lites.com
LED Lighting Benefits
Light Emitting Diodes (LED) are almost unstoppable in terms of lighting efficiency and durability, which make them incredibly resourceful for our sustainable future. They are stylish and cool in many ways, they have such outstanding performance properties that they offer a whole series of practical benefits, including providing healthier light that even improves our moods and a higher blue light that create more tasked focused students and employees. They are more durable, cost efficient, and are environmentally friendly. LED lighting is truly a creative technology, which rightly deserves the title of “Most Innovative Product” in our ERA.
For all purpose lighting illumination, Our M-Lite Solution LED lighting products provide outstanding light, which are already being used commercial, and residential lighting applications. As far as atmospheric lighting is concerned, the multi-colored changing LED lights give inventors like David Rozek enormous creative freedom for outdoor, and indoor LED lighting. These innovative LED lights range from special lamps for military applications, the entertainment industry, and film industry, which inventor David Rozek, and staff are currently building for the next generation of LED lighting.
1. Low Energy Consumption: LED lighting has significantly reduced energy consumption without sacrificing functional efficiency and visual performance. An incandescent bulb is only able to transform 20% of the electricity that it requires into light energy, with the other 80% being given off as heat. when it comes to LED lights they do just the opposite, 80% of the electrical energy is emitted as light energy and only 20% is released as heat. Some M-Lite LED products offer 95% of its energy into to light, and as little as 5% release of heat.
LEDs are also utilized with various lighting control technology which contributes significantly to energy savings. LEDs are fully dimmable with the right driver provided by M-Lite, and are easily incorporated into circuits with a variety of sensors, including daylight harvesting sensors, or Human Centric Lighting.
2. Long Life Expectancy: LEDs are also known for having a long life expectancy, especially when compared to incandescent and fluorescent lighting. A LED light can last up to 100,000 hours at full use, which adds up to 11 years of 100% usage. With 50% usage, a LED lamp can last for 22 years. This is a vast improvement to an incandescent lamp’s operational life, which is approximately 5,000 hours if you are lucky.
The LED’s longevity also allows for unparalleled cost effectiveness, since it reduces maintenance costs and the need for regular bulb replacement. This feature is especially useful if lighting is required in areas that are hard to reach.
3. Durability: LEDs are very durable and resilient, and are the choice lighting solutions for areas that require rugged use. Because they don’t have a fragile glass encasement and do not require a filament to function, LEDs can take a lot of jarring and bumping and still maintain their ability to function at peak efficiency. They are known for being resistant to heat, cold and shock.
Because of this particular LED feature, LEDs are they also developed for rugged use in underwater environments, and for exterior and outdoor lighting solutions. This current generation of LED lighting can be exposed to the elements and will maintain a high-performance visually in rugged environments.
4. A Cool Lighting Solution: LEDs are cool – literally. LEDs only emit a small amount of heat compared to other lighting. The LED’s ability to not cause heat build ups works to the benefit of AC units, which translates to added energy savings and cost effectiveness. Which in turn helps maintain a comfortable environment for people during hot, and muggy weather.
5. Sustainability and Green Lighting: LED is currently the favored solution for sustainable or green lighting products. It does not contain any toxic material (e.g. mercury or neon), which makes it environmentally friendly and easier to dispose of than fluorescent lighting. LEDs do produce a very small amount of UV light, but they emit even less than an incandescent light bulb. That is because the amount of UV that it produces is converted to white light by the phosphors inside the lamp.
Because an LED has a very long operational lifespan, it lessens wattage as it does not require regular bulb replacement. LED lighting also features an unparalleled capacity for energy savings, which is a major concern for sustainable design.
6. LEDs do not attract bugs: LEDs offer relief from another problem—insects. UV light attracts insects. With virtually no UV emissions, M-Lites LED lighting products do not attract bugs, and that has made our LED Lighting products very popular in commercial food service industry and exterior building installations of M-Lite Solution lighting where it’s important to minimize the attraction of pesky insects.
Because of these many combinations of truly innovative features M-Lite Solution LED lighting products are becoming the leading choice for those opting for sustainable design and green lighting solutions World Wide. Our LED lighting solutions offer maximum lighting performance and cost effectiveness without the harmful byproducts that come with traditional lighting solutions. LED lighting is simply your best option, and are more affordable than ever with M-Lite’s LED Lighting Solutions.
Through proven leadership, M-Lite remains in the forefront of the design, engineering, manufacturing, and distribution of LED lighting technology.
Unique in design with maximum capacity of lightning
Significantly less energy consumption than fluorescent lamps
Most cost effective LED technology in the marketplace
Maintenance free, UL approved, and easy to install
In less than 10 minutes you can reduce your fixtures consumption with our LED lighting technology. Enjoy better lighting, while saving money with our easy to install retrofit kit from M-Lites.com
Instant energy savings with our LED lighting solutions
Chicago Building owners are at the forefront of leading the nation with Green Certified Buildings, or LEED Certified buildings. LED lighting upgrades, and retrofits are now playing a big part in that success story, and is one of the easiest upgrades for building owners to improve on to become Green Building Certified. LED lighting upgrades also assists with building owners becoming more compliant as new legislation is introduced over the next year by local, state, and federal agencies. At M-Lite Solution we enjoy providing the latest LED technology to help building owners become more energy efficient.
By improving the standards of LED lighting with M-Lite’s patented designs, we provide this Chicago Warehouse with brighter lighting, we create a cooler work atmosphere for their employees, and provide a maintenance free product for years to come that uses a fraction of the watts compared to less efficient florescent fixtures, and we do it without the mercury, neon, or UV Rays. Environmental sustainability starts with us making a change to better lighting, and M-Lite Solution is a premier provider of LED Technology World Wide.
M-Lite will not only save you a significant amount on your energy consumption, but we will also provide you with superior illumination. M-Lite’s patented LED design will produce a brighter light, and a more Human Centric Blue Light (when 4000 to 5000 kelvin color is selected) that stimulates the mind to become more tasked focused, so that your staff can work at a higher level visual acuity, and out preform others that are working in dull yellow light designed in the 1950’s.
Cost of Waiting
To justify our Chicago Warehouse clients LED retrofit investment, we measure their return, and provide them with peace of mind, by offering a comprehensive Client Impact Analysis that measures, and quantifies the end results of our Energy Efficient LED Lighting upgrade based upon pre-process measurements, and information provided by the end users staff.
The overall goal is the complete success of our Chicago Warehouse’s LED Lighting upgrade. To that end, we have outlined an anticipated Return on Investment (ROI) in our analysis. This analysis provides a baseline of expectations and the framework for our clients decision-making process prior to beginning their LED retrofit. The “Cost of Waiting” graph aides in the decision making process, which normally factors energy, HVAC, and maintenance savings unless otherwise stated.
Energy Reduction and “The LED Retrofit Pay Back”
From the charts below, you can see our Chicago Warehouse has an energy cost savings of 73%. Of course the real real reason many of us look at these reports is to see what the pay back period is. Our Chicago Warehouse operates 90% of its fixtures 24/7, which isn’t common for most commercial buildings, or warehouses. The pay back on our Chicago Warehouse is less than 10 months, and it is of little wonder why informed building owners are making the switch to LED technology in cities like Chicago all over the world.
The Environmental Impact
Because incandescent, florescent, and metal halides consume more energy, they are responsible for a greater amount of pollution associated with electricity generation, including the release of trace amounts of neon, mercury, sulfur dioxide and nitrogen oxide into the surrounding environment while you work under them. Do you really want children, or you peers exposed to these toxic outdated lighting products? Refer to the chart below for how much of an impact one Chicago Warehouse can make.
Our Motto: “The Earth is green, and it is everyone’s responsibility to watch over it.”
At M-Lite Solution we are passionate about assisting building owners like our Chicago Warehouse reduce greenhouse gases. Our patented LED lighting technology is among the most energy efficient lighting solutions offered on the market. M-Lite does this by keeping things simple, we provide brighter light that last, and uses less energy, but don’t take our word for it, see our client testimonials online at www.M-Lites.com.
If you are a building owner, maintenance worker, a student, or just someone that wants to become an energy champion, and wants to save on energy, contact us at (630)290-1319.
Together we can make the world green, one fixture at a time.
Rieke Office Interiors : A Green building making the jump to LED
Rieke Office Interiors (ROI) is Certified by the U.S. Green Building Council
LEED®, the “Leadership in Energy and Environmental Design” Green Building Rating System, is the nationally accepted standard for green buildings developed by the USGBC membership. Full details from the US Green Building Council website. Contact an ROI sales representative for more information about breakthroughs in building science, technology and operations that are available to designers, builders and owners who want to build green and maximize both economic and environmental performance.
The Environment- We care!!
ROI recycles all of its paper, cardboard, plastic stretch film, wood scrap, wood dust and metal. Annually, this is the equivalent of 12 semi-trailers that is being kept out of land fills. So making the switch to LED lighting is a welcomed change for ROI.
To justify our clients investment, we measure the return, and provide our clients with peace of mind, we always provide a comprehensive Client Impact Analysis report that measures, and quantifies the end results of our Energy Efficient LED Lighting upgrade based upon pre-process measurements and information provided by our clients team.
M-Lite Solutions overall goal is the complete success of every LED Lighting upgrade. To that end, we have outlined an anticipated Return on Investment (ROI) in our Analysis. This analysis provides a base line for our clients expectations and the framework for their decision-making.
Cost of Waiting
Retrofitting 57 fixtures to LED Light bars is not a huge undertaking. Our reward comes in many ways. Reike office interiors saves $2000 a year with our upgrade, and together we reduce green house gases along the way. M-Lites gets to show off our LED products to hundreds of commercial building owners, and help them save too.
For more information please email us at Sales@M-Lites.com